Shenzhen Hpt Intelligent Technology Co., Ltd. Buying FAQ

Factory-direct boom barriers from Shenzhen Hpt Intelligent Technology list at $220-260 for compact parking-lot models, $280-320 for brushless LPR-ready units, and $330-380 for AC-motor housings rated IP54. All prices are quoted FOB. Because options such as boom length and OEM/ODM customization shift cost, request a written per-model quotation before comparing suppliers on unit price alone.

Most boom barrier models list an MOQ starting at 1 unit, and the standard lead time is 7 days for 1-50 units. Larger project volumes are scheduled and quoted separately at quotation, so confirm MOQ, lead time, and FOB shipping terms in writing for your specific model before committing to a delivery date.

IP54 is the published protection level for the outdoor AC-motor barrier gates in this range, so it is the safer baseline for weather-exposed parking entrances; brushless LPR models are listed at IP44. Ratings vary by listing, so request the IP rating for your exact model in writing rather than assuming every barrier shares the same sealing standard.

Open and close times range from 1.5~6S on brushless-motor models and 3S/6S on AC-motor units. Brushless motors with TCP/IP communication suit high-traffic gates needing variable speed and anti-tailgating logic, while AC-motor models with RS485, RS-232 and TCP/IP interfaces are a proven choice for standard parking control. Match motor type to your daily vehicle count before ordering.

Yes. Several brushless models support IC Card and License Plate Recognition access with remote control operation over TCP/IP, so the barrier can be wired into parking and access-control platforms, and the manufacturer offers API integration plus OEM/ODM customization under ISO9001 and ISO14001 certified quality management. Define your software protocol in the RFQ so integration scope and cost are fixed in writing.

A full-height face recognition turnstile from Shenzhen Hpt Intelligent Technology (brand HPT) is priced at $900-1,300 per piece FOB, depending on motor option and credential modules. That is a full-height 304 stainless steel lane, not a compact pedestal terminal, so budget installation and access-control software alongside hardware. OEM/ODM customization is available and quoted per project.

The listed throughput rate is 30p/m (30 persons per minute) with a 0.2s reaction time and 0.2s barrier open/close time, so a bi-directional lane can absorb commuter peaks without stacking queues. Real-world speed also depends on credential choice - face, fingerprint, IC card, QR code, or RFID card - so test with your dominant credential before finalizing lane counts.

MOQ starts at 1 piece, with a 7-day lead time for 1-10 pieces and 20 days for 11-200 pieces. Volumes beyond that band are scheduled and quoted per project. Confirm FOB terms and your delivery date in writing at quotation, and build shipping and installation time into your go-live plan rather than relying on factory lead time alone.

Yes. The same lane supports ESD System, face recognition, fingerprint, IC card, QR code and RFID card verification, communicates over TCP/IP, RS485 and RS-232, and includes an LED instruction display plus a face recognition module as a peripheral. API integration and project customization are offered for third-party access platforms. Ask which credential firmware your site needs before ordering.

The full-height turnstile is built for exactly these sites - the listed applications include jails, passenger stations and gymnasiums - with 304 stainless steel construction, a 660mm pass width, anti-pinch, anti-tailgating, collision avoidance and a counting function. Face accuracy and IP ratings are not published on this listing, so request both figures in writing for your environment before sign-off.

Shenzhen Hpt Intelligent Technology lists standard flap barrier gates at $500-1,250 per unit, with speed-gate models at $550-770 per piece, FOB China. Price varies with credential configuration (RFID, IC, QR, face, fingerprint), stainless grade (304 or 316), and single or double movement. Because listings are configuration-dependent, confirm the exact unit price, MOQ, and Incoterm in a written quotation before committing.

Listed MOQ starts from 2 units, and lead time is 15 days for 1-10 units on standard Goldantell flap barriers; Gater speed-gate lines list 7 days for 1-10 pieces. For multi-lane projects, lock the batch schedule, packaging, and warranty terms into the purchase order, because these are quoted per model at quotation rather than published as fixed figures.

Covered outdoor entrances are fine: the standard flap barrier line is rated IP54 in 304 stainless steel, with 316 stainless steel available for corrosive or coastal environments. Indoor-oriented models list only IP45, so the protection level differs by configuration. Request the rated IP figure for your exact model and mounting location in writing before specifying full outdoor duty.

One lane supports face recognition, fingerprint, IC card, QR code, and RFID card, with a barrier open/close time of 0.2 s in 2-way operation. Communication runs over TCP/IP and RS485, and speed-gate lines add RS-232 and dry contact, enabling API integration with existing access-management platforms. Anti-tailgating, anti-pinch, collision avoidance, and counting functions are standard.

Shenzhen Hpt Intelligent Technology manufactures under ISO9001 and ISO14001 management systems, with CE and FCC product compliance and DUNS number 637941335. Flap barriers are supplied under OEM/ODM terms, including project customization, installation guidance, and technical support. During supplier qualification, request certificate copies and written OEM branding scope to prevent compliance issues at customs clearance.

Factory-direct full-height turnstiles from Shenzhen Hpt Intelligent Technology list at $900-1,300 per piece for standard single and double configurations, with jail-security variants reaching $900-1,600 per piece. Price scales with motor type (semi-automatic or full-automatic), credential readers, and single versus double-door layout. Orders ship FOB from Guangdong, China, so confirm per-lane pricing and MOQ in a written quotation.

Listed MOQ starts from 1 piece, with a lead time of 7 days for 1-10 pieces and 20 days for 11-200 pieces. For prison, passenger-station, or construction-site rollouts, fix the batch schedule, spare parts, and warranty terms in the purchase order, because those items are quoted per model at quotation instead of being published as fixed figures.

The AG-PX48141402 full-height turnstile provides a pass width of 660mm, a throughput rate of 30p/m, and a 0.2s reacting time in bi-directional operation. That suits perimeter gates at jails, passenger stations, and construction sites where one credential authorizes one person. If a lobby needs faster flow, plan parallel lanes rather than overloading a single rotor.

The rotor and frame are 304 stainless steel at a product size of 1500*1400*2300mm, which suits exposed perimeter duty, but a specific IP rating is not published on these listings. Before ordering for coastal or high-wind sites, request the rated ingress-protection figure and the operating temperature range in writing, and confirm the surface finish for corrosion exposure.

Each lane accepts RFID card, IC card, QR code, face recognition, and fingerprint credentials, with an optional face-recognition module and ESD-system support for electronics facilities. The barrier opens and closes in 0.2 s and communicates over RS-232, RS485, and TCP/IP, enabling API integration with existing access platforms. Anti-tailgating, anti-pinch, collision avoidance, counting, and LED passage indication are standard.

Factory-direct speed gates from Shenzhen Hpt Intelligent Technology are quoted from $395-450 per piece for standard swing-barrier cores up to $900-1,200 per piece for metro-grade lanes with 2.0 mm SUS 304 stainless steel cabinets and 45-60 p/m throughput. All listings ship under FOB terms, and final pricing depends on lane count, motor type, and access-control configuration.

Minimum order quantity is set per model, and current listings range from 1 piece to 20 pieces, so small trial orders are possible. Lead time is 7 days for 1-10 pieces and 15 days for 11-200 pieces on standard models, extending to 25 days for 51-100 pieces on the metro-grade line. Confirm your exact schedule at quotation.

Yes. Every listed speed gate accepts Face Recognition, Fingerprint, IC Card, QR Code, and RFID Card credentials, including ESD System support for controlled environments. Integration runs over RS-232, RS485, and TCP/IP interfaces, and the barrier opens or closes in 0.2 s. The metro-grade lane adds 32 beam paths per lane of sensor coverage for anti-tailgating detection.

Only select models, so verify before ordering. The compact AG-TX65151202 specifies an operating temperature of -20°C to 70°C for indoor or outdoor use, but no IP ingress rating is published on these speed gate listings, so request the rated figure in writing before exposing cabinets to rain. Standard SUS 304 stainless steel builds resist corrosion in covered entrances.

Yes. Shenzhen Hpt Intelligent Technology produces speed gates under ODM/OEM branding, with models such as AG-TX65159802-H built for custom labels, and holds ISO9001 and ISO14001 management-system certification plus CE and FCC product compliance, with DUNS number 637941335. Warranty terms are not published per listing, so confirm coverage duration in writing before ordering.

Standard multi-factor speed turnstiles from Shenzhen Hpt Intelligent Technology list at $300-350 per unit in stainless steel, while RFID VIP entrance models run $460-550 and high-glass timing-gate variants reach $750-900 per piece. Orders ship under FOB terms, and volume pricing is set per model at quotation.

MOQs are low, with standard multi-factor lanes listing a minimum of 1 set, and production lead time is 15 days for 1-20 sets. Higher-volume RFID entrance lines quote 15 days for 1-100 sets, while OEM/ODM swing-barrier versions run 7 days for 1-10 pieces and 20 days for 11-200 pieces. Confirm your volume tier at quotation.

Each standard speed turnstile reads five credential types: Face Recognition, Fingerprint, QR Code, RFID Card, and IC Card, operating 2-way with a 0.3S barrier open/close cycle. Communication over RS485 and TCP/IP links the lane to third-party access-control platforms, and anti-tailgating with anti-pinch protection is standard on every model.

Yes, for indoor and sheltered entrances. The multi-factor stainless steel models carry a Protection Level of IP54, which guards the cabinet against dust ingress and splashing water. These listings do not publish a working-temperature range or an outdoor IP rating, so confirm the rated figure with the supplier in writing before exterior installation.

Yes. OEM/ODM production is offered, including model AG-TX65151202-H with a standard 600mm passage width customizable to 600-900mm, and the manufacturer holds ISO9001 and ISO14001 certification plus CE and FCC compliance, with DUNS number 637941335. Warranty coverage is not published on the listings, so request written warranty terms with your quotation.

Expect $195-210 per unit for standard outdoor swing barriers with IP54 protection, $320-350 for SUS 304 stainless steel access-control models, and $500-700 for high-speed 304 stainless steel stadium gates. Cost tracks housing material, motor type, and credential support. According to Shenzhen Hpt Intelligent Technology's listed FOB pricing, unit price and MOQ are quoted per model at quotation, so confirm your configuration before comparing suppliers.

Plan for about one week on small orders. Listed lead times are 7 days for 1-10 pieces and 15 days for 11-200 pieces on the 304 stainless steel swing barrier, 7 days for 1-20 units on the golden stainless steel model, and 15 days for 1-100 sets on standard outdoor units. For project volumes, the delivery date is quoted per order, so get the committed date in writing.

Yes, several models in the range are built for outdoor use, with IP54 protection level housings in stainless steel or metal. The high-speed 304 stainless steel gate is rated for working temperatures of -20℃ to +70℃ and runs on a brushless DC 24 V motor. For exposed sites, confirm the IP rating and temperature range for your exact model in writing, since indoor variants are not interchangeable.

Yes. A single swing barrier accepts face recognition, QR code, RFID/IC card, fingerprint, and ESD-system credentials, with anti-pinch, anti-tailgating, and counting functions built in. Backend integration runs over RS485, RS-232, or TCP/IP interfaces plus dry-contact wiring, and throughput reaches 30 people per minute on fast-speed models. Specify your access controller and protocol before ordering so the supplier confirms compatibility in writing.

Look for CE and FCC on the gate electronics and ISO9001 and ISO14001 on the factory. Shenzhen Hpt Intelligent Technology holds CE, FCC, ISO9001, ISO14001, and OHSAS18001, plus DUNS number 637941335 for corporate verification. Product compliance certificates are model-scoped, so always request copies covering the exact model and batch you are ordering rather than generic company certificates.

Budget $120-155 per unit for a standard outdoor stainless steel tripod turnstile, $165-185 for semi-automatic SUS 304 models, and $250-280 for premium golden-finish units. Price mainly tracks housing finish, drive mode, and reader support. According to Shenzhen Hpt Intelligent Technology's listed FOB pricing, unit price and MOQ are quoted per model at quotation, so confirm your exact configuration before comparing suppliers.

Small orders ship fastest: the standard outdoor model AG-PYD1001 lists 5 days for 1-10 pieces, 15 days for 11-50 pieces, and 20 days for 51-100 pieces. Semi-automatic stainless steel models quote 7 days for 1-10 pieces and 15 days for 11-200 pieces. For project schedules, have the supplier confirm the committed delivery date in writing at order placement.

Yes. The outdoor stainless steel tripod turnstiles carry an IP54 protection level and include anti-tailgating, collision-avoidance, and counting functions, which is why they are common at residential communities and tourist attractions. Mounting under a shelter extends service life at exposed sites. Since working temperature is not published on these listings, request the rated range for your exact model in writing before ordering.

Semi-automatic tripod turnstiles in this range are rated at 30 people per minute with a 0.2-second barrier reaction time through a 550mm pass width. That throughput suits staff entrances, residential communities, and tourist sites; for peak commuter flow, a speed gate is the better choice. Confirm the rated throughput for the specific model at quotation, since figures vary by drive mode.

Yes. The tripod turnstiles accept RFID card, IC card, QR code, fingerprint, and face-recognition credentials, with ESD-system support for controlled environments. Communication runs over TCP/IP, RS485, or RS-232, and cabinets are configured for 1-way or 2-way operation. Name your access controller and protocol at inquiry so the supplier confirms reader and interface compatibility in writing before you order.