OEM / ODM Manufacturing
OEM access control customization from a certified factory
FlowGate Pro supports OEM and ODM access control customization for pedestrian turnstile gates and vehicle barrier gates — drawing-based production, materials selection, prototype development, and a project-based MOQ and lead time, all coordinated from one factory in Shenzhen.
OEM/ODM Process
A six-step process from inquiry to after-sales support
Every custom order follows the same sequence so the specification, the sample, and the shipped units all match. You always know which stage your project is in.
Inquiry & drawings review
Share layout drawings, elevations, photos of existing gates, or a rough sketch. We review the application and flag anything that affects the design — clearances, power supply, reader positions, or integration with an existing access control system.
Specification & materials selection
Together we confirm the specification: housing dimensions, lane width or boom length, stainless steel grade, glass or acrylic panels, finishes, and the control board configuration. Every parameter is written into a shared spec before production starts.
Prototype or pre-production sample
For custom designs we build a prototype or a pre-production sample so you can verify form, fit and function before committing to the full order. Sample approvals are documented and used as the reference for production.
Production & QC checkpoints
The order moves through fabrication, assembly, wiring and control programming with QC checkpoints at each stage. Inspectors verify dimensions, sensor alignment, safety cycle timing and function before units move on. See the checkpoints on the factory page.
Export packaging & shipping
Units are packed in export plywood crates with foam protection, ready for sea or air freight. Each crate is labelled and packed against a checklist so arrival inspection is straightforward, whether you receive a single sample or a full container.
After-sales support
We keep documentation for every order — specs, drawings, manuals and spares guidance — so your team can support the installation after it ships. Questions go back to the same engineers who planned the build.
Customization Matrix
What we can customize on a standard platform
Most projects start from one of our standard product lines, then adjust the points below to match the site and the brand. The matrix is a starting point — your drawings decide the final values.
| Branding | Silkscreen logos, panel engravings, door and box labelling |
|---|---|
| Housing color | Powder-coated RAL finishes to match the building standard |
| Dimensions | Housing size, heights and footplates adjusted to site conditions |
| Lane width | 550–900 mm per pedestrian lane, wider on request |
| Boom length | 3–8 m barrier booms for vehicle lanes |
| Control board config | Reader types, relay logic, access profiles and timers |
| Reader options | Card, QR, fingerprint, face recognition, RFID, LPR camera |
| Finishes | Brushed or mirror stainless, glass tint, acrylic thickness |
Drawing-Based Workflow
From drawings to a confirmed bill of materials
Drawings are reviewed by an engineer, not a sales team. Each drawing is checked against our standard platforms and converted into a bill of materials with confirmed materials, dimensions and control board configuration.
How we review
Checked against the platform, quoted before production
We mark each drawing against the closest standard platform and list every deviation in the quote. Where a dimension differs from standard, it is flagged, costed and confirmed before production starts — so there are no surprises at delivery.
To speed up the review, include as many of the fields on the right as you can. If a field is not known yet, our engineers will advise a sensible default for the application.
What to include in your drawings
Field checklist for a faster, more accurate quote
| Dimensions | Overall height, width, depth and clearance around the unit |
|---|---|
| Openings | Door or panel cutouts, access hatches, cable pass-throughs |
| Power | Voltage, frequency, power budget and backup requirements |
| Mount type | Floor, wall, pedestal or barrier mounting details |
| Reader positions | Card, QR, fingerprint, face or LPR camera placement |
| Integration protocol | RS485, TCP/IP, Wiegand, REST API or relay logic |
MOQ & Lead Time
Confirmed at quote, not after the order
MOQ and lead time are quoted against your real specification — product, customization, materials and target quantity. We confirm a workable MOQ and a lead time before you commit.
If you need to compare options, send the same drawing with two quantities and we will quote both so you can see how volume changes unit pricing and lead time.
OEM/ODM questions, answered directly
Turn a drawing into a buildable specification
Send your drawings and project details. We will confirm what is standard, what is custom, and give you a project-based MOQ and lead time.