Complete Guide to Full High Turnstiles: Specs, Selection, and Sourcing

A full high turnstile is the gate you specify when a waist-high barrier is no longer enough. Corrections facilities, passenger stations, construction sites, and industrial perimeters share the same failure pattern with lobby-style gates: people climb over them, or two people walk through behind a single valid card. A full-height rotor closes the passage from floor to head height, so the only way through is a valid authorization, one person at a time.

This guide is written for purchasing managers and retailers evaluating full high turnstile suppliers. It covers how the hardware works, the specifications that decide long-term cost, the three configurations HPT lists in this family, verifiable technical data, and the sourcing mistakes that delay projects. Every figure below comes from the manufacturer's listed product data for model AG-PX48141402. Where a procurement-critical value is not published — warranty terms, sealing ratings — the guide flags it and states what to demand in writing.

What a Full High Turnstile Is

A full high turnstile is a rotating-barrier gate whose rotor occupies the whole passage height. The cabinet holds the rotor locked until the access controller accepts a credential, then indexes one position to admit exactly one person and re-locks. Enforcement is mechanical rather than behavioral: no attendant needs to watch the lane, and the barrier — not policy — decides who gets through.

HPT's full-height listings specify 304 stainless steel construction with a silver finish and a listed product size of 150014002300mm. Confirm which figure is height, width, and depth against your mounting layout before ordering, because the listing does not label the axes.

How It Differs from Waist-Height Gates

Waist-height products — speed gates, swing gates, flap barriers, and tripod turnstiles — trade total containment for speed and comfort in supervised lobbies. A full-height rotor fits where the perimeter is unattended, where the population mixes staff, contractors, and visitors, or where one unauthorized entry is expensive. The trade-off is flow: a rotor admits one person per cycle, so size lane counts to peak flow, not daily average. If your project also includes supervised entrances, HPT's pedestrian turnstile gate range covers the waist-height options on the same credential platform.

Where Full-Height Rotors Are Specified

HPT's own listing titles name jails and corrections facilities, passenger stations, and construction sites as reference deployments. Buyers apply the same hardware at warehouse staff entrances, factory gates, utility compounds, and stadium concourses. Sites that also control vehicles can source barrier gates, license plate recognition (LPR/ANPR), and RFID vehicle access from the same manufacturer, keeping one support contact across pedestrian and vehicle infrastructure.

Buyer Problem

Most buyers arrive at full-height turnstiles after another control has failed, and the trigger is usually one of four.

Tailgating and pass-back. A card system records which credential was presented, not who walked through. Supervisors lend badges, contractors keep expired ones, and visitors follow staff through open barriers. A full-height rotor makes one-person-per-credential a mechanical fact, and the listed counting function produces a passage count you can reconcile against credential events.

Unattended perimeters. Guarding a gate around the clock is a recurring labor cost; a rotor delivers the same enforcement at fixed hardware cost, with no shifts to staff.

Mixed populations. Construction sites and passenger stations push employees, contractors, and the public through the same lane. The HPT series lists six access control types — ESD system, face recognition, fingerprint, IC card, QR code, and RFID card — so one lane can serve staff on cards or biometrics, visitors on QR codes, and static-controlled entry at electronics-plant doors.

Fragmented procurement. Integrators and retailers increasingly need pedestrian and vehicle control under one purchase order. HPT is a factory-direct manufacturer covering both, with OEM/ODM, project customization, API integration, installation guidance, and technical support as listed services. The family's low listed MOQ and its lead times — 7 days for 1-10 pieces and 20 days for 11-200 pieces — make a single-lane trial or a staged rollout a small, plannable order.

Selection Criteria

Compare full-height turnstiles on the following points before you shortlist suppliers.

Barrier mechanism and drive

The series is offered with semi-automatic and full-automatic drives, and the double-lane listing specifies a brushless motor. Semi-automatic keeps cost down and lets the user complete the rotation; full-automatic indexes the rotor under power. Duty expectations differ sharply between a low-traffic staff door and a shift-change factory gate, so state your traffic profile and confirm the drive type and duty rating in writing.

Materials and environmental fit

All three listings specify 304 stainless steel — a grade commonly chosen for outdoor use because it resists corrosion without coating — with a silver finish. The listings state no ingress-protection rating. For exposed installations, make a stated sealing rating for the drive housing and electronics a purchase-order requirement rather than an assumption.

Passage geometry and throughput

Listed figures: 660mm passage width, a throughput rate of 30p/m (persons per minute), 0.2s reaction time, 0.2s barrier open/close, bi-directional passage, and LED indication. Three checks follow. The 660mm width suits an adult with a backpack but not mobility devices, so plan an accessible route where regulations require one. The 30p/m figure is a free-flow maximum, so validate lane count against your measured shift-change peak. Bi-directional operation lets one cabinet serve entry and exit in low-flow applications.

Credentials and system integration

The series lists ESD system, face recognition, fingerprint, IC card, QR code, and RFID card support, with a face recognition module available as a listed peripheral. Communication interfaces are RS-232, RS485, and TCP/IP. If your access controller or visitor platform needs a different protocol or event-level data, raise it at quotation; API integration is a listed manufacturer service.

Technical Proof

The tables below reproduce the manufacturer's listed data for this family. Treat them as the RFQ baseline and ask the supplier to confirm each line in writing for the configuration you are buying.

• Parameter · Listed value
• Model / brand · AG-PX48141402 / HPT
• Manufacturer · Shenzhen Hpt Intelligent Technology Co., Ltd., Guangdong, China
• Material / finish · 304 stainless steel / silver
• Product size · 150014002300mm (as listed)
• Passage width · 660mm
• Passage direction · Bi-directional, 2-way
• Throughput rate · 30p/m
• Reaction time · 0.2s
• Barrier open/close time · 0.2 s
• Safety functions · Anti-pinch, anti-tailgating, collision avoidance, counting
• Indication · LED
• Interfaces · RS-232, RS485, TCP/IP
• Incoterm / lead time · FOB; 1-10 pieces: 7; 11-200 pieces: 20

• Listed configuration · Drive · Unit size (listed) · Unit weight (listed) · Price (FOB)
• External full height turnstile with RFID reader · Semi-automatic / full-automatic · 160X120X250 · 150.0 · $900-1,300 / piece
• Double full height turnstile (jail, passenger station, construction site) · Brushless motor · 240X146X240 · 60.0 · $900-1,300 / piece
• Single / double door security full height turnstile gate · Not stated; confirm · 240X146X240 · 60.0 · $900-1,600 / piece

The same model family therefore spans $900-1,600 per piece depending on drive and door configuration — specify the configuration in your RFQ, or competing quotes will not be comparable.

The manufacturer's certifications include ISO9001 (quality management), ISO14001 (environmental management), OHSAS18001 (occupational health and safety), CE and FCC conformity, China's CCC and CQC marks, National High and New Technical Enterprise status, SRDI enterprise certification, Guangdong Province Trustworthy Enterprise recognition, an IP management system certification, and Dun & Bradstreet registration 637941335. Request scanned certificates against each claim and match the holder name to the contracting entity before paying a deposit. Warranty terms are not published in the listing data, so duration, coverage split, and spare-part availability belong in the contract.

Risks and Mistakes

Buying on unit price alone. The $900-1,600 spread within one family shows why. A cheap quote that omits drive type, credential readers, or door configuration is not comparable to a specified one.

Assuming outdoor sealing. 304 stainless steel handles weather, but the listings publish no ingress-protection rating for the drive housing or electronics. For exposed sites, a stated rating should be a purchase-order line item.

Ordering the wrong lane layout. Unit weights differ by configuration (150.0 versus 60.0 as listed), and footprints differ with lane count. Check the mounting area against the listed product size and confirm dimension orientation before ordering.

Skipping pre-shipment functional tests. Make it a PO condition that the factory powers every unit, cycles the rotor, verifies LED indication and credential release, and photographs the results before container loading.

No written warranty or spares terms. Warranty data is absent from the listing, so get duration, mechanical-versus-electronics coverage, spare-part lead times, and firmware support into the contract.

Leaving integration to commissioning day. Confirm protocol mapping against your access platform during quotation, and use the listed API integration service scope instead of assuming driver availability.

FAQ

What credentials do these turnstiles accept?

The series lists ESD system, face recognition, fingerprint, IC card, QR code, and RFID card, with a face recognition module available as a listed peripheral.

What are the price and lead times?

Listed prices run from $900-1,300 to $900-1,600 per piece FOB depending on configuration, with lead times of 7 days for 1-10 pieces and 20 days for 11-200 pieces.

Can they be installed outdoors?

The 304 stainless steel build suits weather exposure, but the listings state no ingress-protection rating — confirm sealing in writing for exposed sites.

What certifications does the manufacturer hold?

ISO9001, ISO14001, OHSAS18001, CE, FCC, CCC, and CQC, plus National High and New Technical Enterprise status, SRDI enterprise certification, and Dun & Bradstreet registration 637941335.

Next Step

The cheapest way to de-risk a multi-lane project is to buy one lane first. A low listed MOQ and the 7-day lead time on small orders let you verify rotor action, finish quality, credential behavior, and controller integration before committing to a fleet. Request a sample through HPT's contact page and include your lane count, credential mix, mounting dimensions, and access control platform so the first quotation lands on the right configuration.

Ask for the full-height turnstile procurement checklist: it converts the confirmation items above — drive type, sealing rating, warranty terms, pre-shipment tests, and integration protocol — into an RFQ line list that makes quotes from any supplier comparable. Resellers planning private-label programs should also review HPT's OEM and ODM services before quoting. Shenzhen Hpt Intelligent Technology Co., Ltd. is a factory-direct ISO9001/ISO14001 certified manufacturer of integrated pedestrian and vehicle access control, so trial lanes, production fleets, and vehicle-side hardware share one supply base and one support contact.